SwitchBot Strip Light

- A smartphone or tablet using Bluetooth 4.2 or later. - The latest version of our app, downloadable via the Apple App Store or Google Play Store. - A SwitchBot account, you can register via our app or sign in to your account directly if you already have one.

iOS and Android system requirements:

https://support.switcherbot.com/hc/en-us/articles/12567397397271

Connect your light to a power supply and check if it can light up normally. - Open our app and tap the "+" icon located in the right-hand corner of the home page and select Add Device. Select the relevant device icon. Then follow the instructions to add your Strip Light. - Make sure your device works normally before installing it.

1. Clean the installation surface and ensure that it is dry and clean.

2. Peel off the tape liner on the back and stick your Strip Light onto the installation surface.

3. You may secure your Strip Light by using the mounting buckles and screws provided, especially at turns.

Note: Do not excessively bend this product.

4. Connect the controller to the light as shown.

5. Plug your Strip Light in using the power adaptor.

6. Control your Strip Light using the controller or the app.

- Cut the Strip Light at the designated point only when the power is off. The cut-off part will not work. - Please keep the installation surface clean and even for easy adhesion. - Use the mounting buckles on surfaces such as wallpaper for a more secure installation. - The LED light's surface is splashproof, but the circuit board beneath is not waterproof. Avoid submerging the product in water. - The LED strip generates heat during operation. Ensure proper air circulation around it for effective heat dissipation.

Press and hold the On/Off button and Music Mode button simultaneously for 8 seconds until red, green and blue lights flow through your Strip Light.

Note: After resetting the device, all settings will resume to default values.

In order to improve user experience, we will regularly release firmware updates to introduce new functions and solve any software defects that may occur during usage. When a new firmware version is available, we will send an upgrade notification to your account via our app. When upgrading, please make sure your product has sufficient battery or stay powered on and make sure your smartphone is within range to prevent interference.

For more information regarding troubleshooting your device, please scan the QR code.

Power: 24W

Input: 100-240 V, 50-60 Hz

Color Type:

RGBIC WW (Cool White + Warm White)

Lumens: 1200 lm

Color Temperature: 2700-6500 K

Strip Width: 12 mm (0.5 in.)

Dimming Range: 1% to 100%

Lifespan: 25000 h

Applicable Environment: Indoor only

Operating Temperature:

0°C to 40°C (5°F to 113°F)

Operating Humidity: 0 to 90% RH

Connectivity: 2.4 GHz Wi-Fi+Bluetooth 4.2

We warrant to the original owner of the product that the product will be free from defects in materials and workmanship for a period of one year from the date of purchase. Please note that this limited warranty does not cover:

1. Products submitted beyond the original one-year limited warranty period. 2. Products on which repairs or modifying have been attempted. 3. Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications. 4. Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.). 5. Damage due to misuse,abuse,negligence or casualty (e.g. fire).

6. Other damage that is not attributable to defects in the manufacture of product materials. 7. Products purchased from unauthorized resellers. 8. Consumable parts (including but not limited to batteries). 9. Natural wear of the product.

Feedback: If you have any concerns or problems when using our products, please send feedback via our app through the Profile > Support page.

Setup and Troubleshooting:

support.switch-bot.com

Support Email: support@switch-bot.com