SwitchBot Bot

1 Remove the plastic battery isolation tab.

and the SwitchBot app.

Spare Adhesive Tape \times 1 iOS 11.0

3 Enable Bluetooth on your smartphone.

4 Open our app, your SwitchBot Bot should appear on the home page once discovered and you can simply tap on your device to control it. If your device doesn't appear, swipe down to refresh the page.

Please note: You do not need a SwitchBot account to control your Bot. However, we recommend that you register a SwitchBot account and add your name to the SwitchBot account to make the most of other features.

Register a SwitchBot account and sign in from the app's Profile page. Then add your Bot to your account.

Learn more at

http://support.switchbot.com/hc/en-us/articles/360037695814

Attach SwitchBot Bot to a switch using the adhesive tape provided.

Select an Operation Mode

There are two different ways to operate SwitchBot Bot. Choose a mode to control your device according to your needs. You can change which mode you use via our app at any time.

Press mode: used for pushing buttons or one-way control switches.

Switch mode: used for pushing and pulling switches (requires an add-on).

Please note: make sure your installation surface is clean and dry before applying adhesive tape. After installation is complete please wait for at least 24 hours for adhesiveness to take effect.

Alexa, turn on my living room light.*

Hey Google, turn off my bedroom light. * You can give your SwitchBot Bot an alias via our app. ** Done using personalized phrases in Siri Shortcuts If you have a SwitchBot Hub (sold separately), you can control your Bot remotely using voice commands. Enable Cloud Services first before using voice commands. Learn more at https://support.switchbot.com/hc/en-us/sections/360005960714

1

1 with \therefore m - 1 \neq 0 ;

e a CR2 battery

the cover from the notch on the side of the slice.

the battery.

cover back on the device.

Learn more by visiting

http://support.switchbot.com/hc/en-us/articles/360037747374

To reset factory settings, simply remove the cover of your SwitchBot Bot and press the reset button. Your device password, mode settings, and schedules will be restored to the factory settings.

Size: 43 \times 37 \times 24 \, mm (1.7 × 1.5 × 0.9 in.) Weight: Approx. 42 g (1.5 oz).

Power: Replaceable CR2 battery \times 1

(600 days of use under lab controlled conditions of 25°C [77 \mathbb{F}^{\prime \prime}] twice daily.)

Network Connectivity: Bluetooth Low Energy 4.2 and above

Transmission Range: Up to 80m (87.5 yd.) in open areas

Swinging Angle: 120° max.

Torque Strength: 1.0 kgf max.

System Requirements: iOS 11.0+, Android OS 5.0+, watchOS 4.0+

Only for use in dry environments. Do not use your device near sinks or other wet places.

- Do not expose your Bot to steam, extremely hot or cold environments.

- Do not place your Bot near any heat sources such as springs, fireplaces, heaters, radiators, stoves, or other things that produce heat.

- Your Bot is not intended for use with medical or life support equipment.

Do not use your Bot to operate equipment for which in the case of a device, the device itself could be dangerous (e.g. saunas, sunlamps, etc.).

Do not use your Bot to operate equipment for which the temperature control options could be dangerous (e.g. stoves, heaters, etc.).

We warrant to the original owner of the product that the product will be free from defects in materials and workmanship. Please note that this limited warranty does not cover:

1. Products submitted beyond the original limited warranty period.

2. Products on which repairs or modifying have been attempted.

3. Products subjected to falls, extreme temperatures, water and other weathering conditions outside the product specification.

4. Damage due to natural disaster (including but not including lightning, flooding, tornado, earthquake, hurricane, etc.).

5. Damage due to misuse, abuse, negligence or casualty (e.g. fire).

6. Other damage that is not attributable to defects in the manufacture of product materials.

7. Products purchased from unauthorized resellers. 8. Consumable parts (including but not limited to batteries). 9. Natural wear of the product.

Setup and Troubleshooting: support.swiht-bot.com

Support Email: support@switch-bot.com

Feedback: if you have any concerns or problems when using our app, please email us at our app through the Profile > Help & Feedback page.

RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20 mW specified in EN 62479:2010. RF exposure assessment has been performed to prove that this device can generate a maximum EIRP emission above the reference level as specified in EC Council Recommendation(1999/519/EC).

DE DOC HuaWuan Technology (Shenzhen) Co., Ltd. declares that the radio equipment type SwitchBot-S1 is in

Compliance with Directive 2014/53/EU. The full text of the following information is available in the following internet address: support.switch-bot.com

UKCA DOC Herby, Wanon Technology (Shenzhen) Co., Ltd. declares that the radio equipment type SwitchBot-S1 is in compliance with UK Radio Equipment Regulations

(SI 2017/1206). The full text of the UK declaration of the following information: http://www.swiwer.com/support_address: support.swiwer-bot.com

This product can be used in EU member states and UK. Manufacturer: Wano Technology (Shenzhen) Co., Ltd. Address: Room 1101, Qiancheng Commercial Center, No.5 Haicheng Road, Mabu Community, Xixiang Subdistrict, Bao'an District, Shenzhen, Guangdong, P.R.China, 518100

Operation frequency (Max power) BLE: 2402 MHz to 2480 MHz (5.0 dBm) BIL: 1000 MHz to 1000 MHz (3.0 dBm)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit board and turn it off. The system is then controlled. Consult the dealer or an experienced radio/TV

technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF standards. The device is designed to be portable in portable exposure condition without restriction.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Technology (NIST) and NIST's approval for RSS. Operation is subject to the following two conditions: (1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired interference.

L'émetteur/recepteur exempt de licence content du dans le present applique est conforme aux CNR d'Innovation, Sciences et Développement (2014) à l'origine des employés radio exemples de licence. L'exploitation est autorisé aux

deux conditions suivantes :

(1) L'appareil ne doit pas produit de brouillage.

(2) l'appareil doit accepter tout bruillage radioélectrique sub, même si le bruillage est

susceptible d'en compromètre le fonctionnement.

IC Radiation Exposure Statement

This equipment complies with the limits of exposure and protection of the environment. Cet equipment est conforme aux

limites d'exposition aux radiations de la IC définies pour un environnement non contrôlé.

用安康新建在的业：Woaan Technology (Shenzhen) Co., Ltd.

原名：马自明

早用 \mathbb{Z}[\mathbb{I}]^{2} 【早用 \mathbb{Z}[\mathbb{I}]^{2} 】 [10]Kunming Li, Xueqiu Wu, Wao Theorem (Shenzhen) Co., Ltd., China [2022.01]

JINCHONBHO:R-R-Woa-SwitchBot-J1

且丘志達在崇禪宗道，不念國主，悉神宗安歸之，則賊而還的是。

取得潜艇编之太低功率时航标器材、开舱标准、公商或商船等，不得擅自盲目旋航频率、加大功率或更改原航次之外性及功能。

功率射频器材之使用不得影响航管安全及下耦合合法通信，现觉得下耦个现象颇·愿立即停用；加改签条干搭卸

方得繼續使用。

前述适合通电：指电气修理法规定操作之前断电维修。 前导式：指在电气修理法或电工-科学及厨房所用的流射性静电接地维修之用。

EU declaration of conformity is available at the following internet address: https://support.swit.ch bot.com/hc/en-us/articles/5114648510359-DECLARATION-OF-conformITY