soundcore Space One Pro | FlexiCurve Over-Ear Headphone Jet Black

1. USB-C Charging Port 2. 3.5mm Input 3. LED Indicator 4. Power Button 5. NC Button 6. Volume Up Button 7. Volume Down Button 8. Multi-function Button

1. Turn both panels around until you can see the "L" and "R" marks.

2. Fold up the left panel, then rotate the right panel to the position where you can see the soundcore logo.

3. Fold up the right panel to align with the left panel.

4. Now you've successfully folded your headphones.

Wear the headphones with the "L" logo on your left ear and "R" logo on your right ear. Adjust the length of the headband for a comfortable fit.

Auto Pairing: Press and hold the power button for 2 seconds to power on. The headphones will automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore Space One Pro" on your device's Bluetooth list to connect.

• When pairing, the LED indicator will start flashing blue slowly. After the pairing is successful, the LED indicator will stay on for 3 seconds and then go off.

Google Fast Pairing: Enjoy instant pairing with your Android smartphone (running Android 6.0 and above) via Fast Pair enabled by Google.

To manually enter Bluetooth pairing mode, when the headphones are powered off, press and hold the power button for 5 seconds to pair.

When the battery is running low, you will hear a voice prompt.

Use the provided USB-C charging cable to connect your headphones to a power source.

A full battery recharge takes about 2 hours, and 5 minutes of charging offers 8 hours of wireless playtime.

• Fully dry the USB port before charging.
• Do not turn on your headphones while charging.

DUAL CONNECTIONS

The headphones can connect with two devices at the same time.

When already connected to one device, press the power button twice to pair with another device.

You can also enable Dual Connections via the soundcore app.

In the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device.

*You can clear the history of previously-connected devices in Device List.

x1: Press once x2: Press twice

2s: Press and hold for 2 seconds

* You can enable Normal mode in the soundcore app.

To reduce ambient noise, switch to noise cancellation (default) via the NC button and customize it in the soundcore app.

• Adaptive Noise Cancelling: Perform real-time calculation based on the external environment and wearing condition to ensure optimal noise cancellation.
• Custom Noise Cancelling: Set the level of noise cancellation manually.

To stay aware of your surroundings while listening to music, switch to transparency mode via the NC button and customize it in the soundcore app.

• Custom Transparency Mode: Set the level of transparency manually.

With the Sidetone feature on, you will hear your own voice loud and clear when making or receiving phone calls using the headphones.

*Sidetone feature is on by default. You can disable this feature via the soundcore app.

Easy Chat mode automatically lowers the volume of music and amplifies the voice of the person you're talking to so that you can communicate without taking the headphones off. When you have stopped talking for 5 seconds (the duration can be set in soundcore app), your headphones will automatically exit Easy Chat mode and resume normal volume.

*You need to enable Easy Chat mode via the soundcore app.

Enable LDAC in the soundcore app for higher-quality audio.

*Only available on devices powered by Android 8.0 or later.

• Use devices powered by Android 8.0 or later to experience LDAC quality sound.
• LDAC provides higher quality sound, increases power consumption, and reduces playtime.
• Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.

1. Go to settings in the soundcore app. 2. Click on "Sound Mode". 3. Select "Preferred audio quality" to switch to LDAC codec. 4. You will be notified that the headphones do not support LDAC when connected to two devices. Also, please note that Dolby Audio is not supported when LDAC has been enabled. Select "Turn on" to continue. 5. It takes about 10 seconds to switch audio codecs. You may be requested to update the headphones' firmware if available.

Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will automatically turn off Bluetooth mode.

*During wired listening, you can only switch ambient sound modes (ANC / Transparency) via the NC button. And other buttons will not function.

You might need to reset your headphones if you experience connectivity or function issues.

Delete the pairing history from your Bluetooth device first. Press and hold the volume up and power button simultaneously for 5 seconds until the LED flashes red three times.

You will be informed once the new version of firmware is detected when you connect the headphones with the app. Ensure the headphones are powered on and connected to a device until the firmware update is complete. During the update, avoid any usage and ensure stable access to the internet.

Specifications are subject to change without notice.

Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.

Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.

1. Power consumption in standby mode: ≤0.5W 2. Powermanagement: ≤20min 3. Information of applicable adapter:

Brand: ANKER

Manufacturer: Anker Innovations Limited

Model: A2337

Input: 100-240Vac, 1A, 50-60Hz

Output: 5V 3A / 9V 3A / 12V 2.5A / 15V 2A / 20V 1.5A (30W Max)

Default Open Port: Classic Bluetooth

Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.