WEARING
Wear the headphones with the "L" logo on your left ear and "R" logo on your right ear. Adjust the length of the headband for a comfortable fit.
CHARGING
Fully dry the USB port before charging.
Do not turn on your headphones while charging.
Use a certified USB-C charging cable and charger to prevent any damage.
Auto Pairing: Press and hold the power button for 3 seconds to power on. The headphones will automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore Space One" on your device's Bluetooth list to connect.
Google Fast Pairing: Enjoy instant pairing with your Android smartphone (running Android 6.0 and above) via Fast Pair enabled by Google.
To manually enter Bluetooth pairing mode, when the headphones are powered off, press and hold the power button for 5 seconds to pair.
DUAL CONNECTIONS
The headphones can connect with two devices at the same time.
When already connected to one device, press the power button twice to pair with another device.
In the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device.
BUTTON CONTROLS* You can enable Normal mode in the soundcore app.
| Switch ambient sound modes (ANC / Transparency) | NC | Press once | |
| Power on / off | Press and hold for 3 seconds | ||
| Play / Pause | Press once | ||
| Next track | + | Press and hold for 2 seconds | |
| Previous track | - | Press and hold for 2 seconds | |
| Volume up / down | +/- | Press once | |
| Answer / End a call | Press once | ||
| Reject a call | Press and hold for 2 seconds | ||
| Mute / Restore the microphone | Press and hold for 2 seconds | ||
| Activate Voice Assistant | Press and hold for 2 seconds |
NOISE CANCELLATION
To reduce ambient noise, switch to noise cancellation (default) via the NC button and customize it in the soundcore app.
- Adaptive Noise Cancellation: Adjust the level of noise cancellation automatically for various scenarios. - Custom Noise Cancelling: Set the level of noise cancellation manually.
To stay aware of your surroundings while listening to music, switch to transparency mode via the NC button and customize it in the soundcore app.
- Custom Transparency Mode: Set the level of transparency manually.
EASY CHAT
Easy Chat mode automatically lowers the volume of music and amplifies the voice of the person you're talking to so that you can communicate without taking the headphones off.
To activate Easy Chat, hold the left panel for 1 second until you hear a notification sound. Turn off this mode by releasing your hand. (Enabled in app) - Easy Chat will automatically turn on when you're talking, and off when you stop talking for 5 seconds. (Beta version is enabled in app)
WARING DETECTION
Auto-pause music playback when removing the headphones, wear them again to resume.
* You can enable Wearing Detection in the soundcore app.
LDAC
Enable LDAC in the soundcore app for higher-quality audio.
* Only available on devices powered by Android 8.0 or later.
Use devices powered by Android 8.0 or later to experience LDAC quality sound. - LDAC provides higher quality sound, increases power consumption, and reduces playtime. - Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
1. Go to settings in the soundcore app. 2. Click on "Sound Mode". 3. Select "Preferred audio quality" to switch to LDAC codec. 4. You will be notified that the headphones do not support LDAC when connected to two devices. Select "Turn on" to continue. 5. It takes about 10 seconds to switch audio codecs. You may be requested to update the headphones' firmware if available.
WIRED LISTENING
Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will automatically turn off Bluetooth mode.
You might need to reset your headphones if you experience connectivity or function issues.
Delete the pairing history from your Bluetooth device first. Press and hold the volume up and power button simultaneously for 5 seconds until the LED flashes red three times.
LED LIGHT GUIDE
| - - | Flashing white |
| - - | Flashing red |
| - - | Flashing blue |
| Steady blue | |
| Light off |
FIRMAWARE UPDATE
You will be informed once the new version of firmware is detected when you connect the headphones with the app. Ensure the headphones are powered on and connected to a device until the firmware update is complete. During the update, avoid any usage and ensure stable access to the internet.
Specifications are subject to change without notice.
| Input | 5 V --- 0,58 A |
| Rated output power | 10mW |
| Battery capacity | 580mAh |
| Charging time | 2 hours |
| Playtime (with ANC off) | Up to 55 hours |
| Playtime (with ANC on) | Up to 40 hours |
| Driver size | 40mm |
| Frequency response | 20Hz - 20kHz |
| Impedance | 16Ω |
| Bluetooth version | 5.3 |
| Bluetooth range | 15m / 49ft |
1. Power consumption in standby mode: \leq 0.5W 2. Powermanagement: ≤20min 3. Information of applicable adapter:
Brand: ANKER
Manufacturer: Anker Innovations Limited
Model: A2337
Input: 100-240Vac, 1A, 50-60Hz
Output: 5V = 3A / 9V = 3A / 12V = 2.5A / 15V = 2A / 20V = 1.5A (30W Max)
Default Open Port: Classic Bluetooth
Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.