soundcore P40i | Smart ANC True-Wireless Earbuds Black

\textcircled{1} . Touch Control Area \textcircled{4} . USB-C Charging Port

\textcircled{2} . Charging Contactors \textcircled{6} . LED Light Strip

\textcircled{3} . Reset Button \textcircled{7} . Phone Stand

S L

Choose the ear tips that fit your ears best and take a fit test in the soundcore app to ensure you get the best ANC performance..

Open the charging case, the earbuds will automatically power on and enter Bluetooth pairing mode. Select "soundcore P40i" from your device's Bluetooth list when connecting for the first time.

• When pairing, the LED light strip will start flashing white slowly. After the pairing is successful, the LED light strip will stay on for 2 seconds and then go off.

1. Place the earbuds in the charging case and close it.

• Fully dry off the earbuds and the USB-C charging port before charging.
2. Connect the charging case to a power supply by using a certified USB-C charging cable. Alternatively, position the charging case at the center of your wireless charger for wireless charging.

To connect the earbuds with two Bluetooth devices at the same time, first open the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device. After completing the app configuration, wear the earbuds, then press and hold the touchpad on both earbuds for 3 seconds simultaneously.

To manually enter Bluetooth pairing mode, place the earbuds in the charging case and leave the case open. Press and hold the reset button behind the charging case for 3 seconds until the LED light strip flashes white rapidly.

TWS \$ L×2 R×2 ③( L/R 2s MONO 6 ③(

×1: Tap once

\times 2 : : Tap twice

2s: Tap and hold for 2 seconds

You can also customize controls in the soundcore app.

You can select noise cancellation, normal, or transparency mode in the soundcore app.

• Adaptive ANC: Optimize noise cancellation by adapting to your ears and environment.
• Transparency: Stay aware of your surroundings while listening to music.

1 2

To power off, return the earbuds to the charging case and close it.

1 2

Place the earbuds in the charging case and leave the case open. Press and hold the reset button behind the charging case for 10 seconds until the LED light strip flashes white rapidly three times.

You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage.

Specifications are subject to change without notice.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license.Other trademarks and trade names are those of their respective owners.

1. Power consumption in standby mode: ≤0.5W 2. Powermanagement: ≤20min 3. Information of applicable adapter:

Brand: ANKER

Manufacturer: Anker Innovations Limited

Model: A2337

Input: 100-240Vac, 1A, 50-60Hz

Output: 5V 3A / 9V 3A / 12V 2.5A / 15V 2A / 20V 1.5A (30W Max)

Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.