1. Turn On / Off
| ON | Press once |
| OFF | Press and hold for 2 seconds |
Soundcore Motion+ is equipped with High-Resolution Audio. This specialty gives the speaker a better sound quality by referring to digital processes that allow playback of music using higher sampling rates. Note: Soundcore Motion+ supports Qualcomm® aptX™.
With True Wireless Stereo technology, you can pair your Soundcore Motion+ with another Soundcore Motion+ to explore the best sound effects with left and right sound channels separated on both speakers.
Music
| ×1 | Play / Pause |
| ×2 | Play Next Song |
| ×3 | Play Previous Song |
| ×1 | Press to turn Bass on |
| ×1 | Press once to activate bass Note: Press again to switch back to Normal Equalizer |
| ×2s | Activate Siri / Other Voice Control Software |
| Volume Up / Down |
Mobile phone
| ×1 | Answer Call / End Call |
| ○2" | Reject Call / Switch between a call on hold and an active call |
| >2s | End current call and answer incoming call / End current call and switch to call on hold |
| >2s | Switch audio source between Speaker and Phone |
When turned on, Soundcore Motion+ will automatically connect to the last connected device if available. If not, press the Bluetooth button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Motion+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
b. AUX-In mode
- Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Motion+
- When not in use, store your speaker in a cool place.
Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use. USB type C cable only supports charge in, it does not support charge out. Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
Specifications
Specifications are subject to change without notice.
Input: 5 \lor = 2 A
Audio output: 30 W
Battery capacity : max.6700mAh
Charging time : Approximately 4 hours(When power is off and the adapter must be at least 5V/2A)
Playtime (varies by volume level and music content): 12 hours
Size: 257 ×79 ×81 mm / 10.1 ×3.1 ×3.2 inch
Weight (without packaging): 1050 g / 37 oz
Bluetooth version: V 5.0
Bluetooth range: 30m/99ft
Sound Frequency Range: 50Hz~40kHz
soundcore APP
soundcore
soundcore
GET IT ON
Goole Play
Google Play and the
Google Play logo are
trademarks of Google Inc.
Download on the
AAp Store
Apple and the Apple
logo are trademarks
of Apple Inc.
| Variable 'x' | Range of variable | Content |
| Seventh | 0-9 or A-F | Denotes the hardware version which is not effected on the safety compliance. |
| Eighth | 8,9,A,B,C... | Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. |
| Ninth and tenth | 01,02,03... | Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on. |
| Eleventh | 1-7 | Denotes date, 1 means Monday, 2 means Tuesday..., 7 means Sunday and so on. |
| The last five | 00001-99999 | Denotes serial No. |
1. Power consumption in standby mode: ≤0.5W 2. Power management: ≤ 20min 3. Information of applicable adapter:
Brand: ANKER
Manufacturer: Anker Innovations Limited
Model: A2337
Input: 100-240V~ 1.0A, 50-60Hz
Output: 5.0V ⎓ 3.0A 15.0W / 9.0V ⎓ 3.0A 27.0W / 12.0V ⎓ 2.5A 30.0W / 15.0V ⎓ 2.0A 30.0W / 20.0V ⎓ 1.5A 30.0W (30.0W Max)
Default Open Port: Classic Bluetooth
Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.