Charge your Speaker
- Use a certified USB-C cable and charger to prevent any damage. Fully charge this speaker before the first use to prolong the lifespan of the built-in battery. Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.
Flashing red
Low battery
Steady red
Being charged
Steady white
Fully charged
Charge your USB Devices
Charge your USB devices through the USB-A charging port.
Powering On/Off
Press and hold for 2 seconds
Steady white
Power on
Press and hold for 2 seconds
Light off
Power off
This speaker will power off automatically after 30 minutes if no device is connected.
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
| Press | Enter Bluetooth pairing mode |
| Flashing blue | Bluetooth pairing |
| Steady blue | Bluetooth connected |
Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers can pair up with each other for true wireless stereo sound. In TWS mode, connect either one of the two speakers with your mobile device so that both speakers play the same audio (one as L channel and the other as R channel).
On both Soundcore speakers, press the TWS button to enter TWS pairing mode.
The speakers start searching for each other to establish the TWS connection. The TWS LED indicator on both speakers will flash white. Once successfully connected, the TWS LED indicator on both speakers will become steady white.
TWS Press
Enter TWS pairing mode
Flashing white
TWS pairing
C Steady white
TWS connected
- To exit the TWS mode, press and hold the TWS button for 2 seconds.
Button Controls
d Press
Play/Pause
Press twice
Next track
Press three times
Previous track
Press or press and hold
Adjust volume
BASS Press
Turn BassUp on/off
| Press | Answer/End a call |
| Press | Answer a second incoming call and put the current call on hold |
| Press and hold for 2 seconds | Reject an incoming call |
| Press and hold for 2 seconds | Switch between a call on hold and an acitve call |
| Press and hold for 2 seconds | Activate Siri or other voice assistant software |
Soundcore App
Download the Soundcore app to enhance your experience.
Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are 4 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- Soundcore Signature: Normal EQ mode with well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when time is up.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Specifications
Specifications are subject to change without notice.
| DC power input | 5 V==2.1 A |
| Battery capacity | 10000 mAh |
| USB output | 5 V==1 A |
| Audio output power | 30 W |
| Charging time | 4 hours |
| Playtime (varies by volume level and music content) | Up to 24 hours |
| Waterproof level | IPX7 |
| Bluetooth version | 5.0 |
| Bluetooth range | 20 m / 66 ft |
| Variable 'x' | Range of variable | Content |
| Seventh | 0-9 or A-F | Denotes the hardware version which is not effected on the safety compliance. |
| Eighth | 8,9,A,B,C... | Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. |
| Ninth and tenth | 01,02,03... | Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on. |
| Eleventh | 1-7 | Denotes date, 1 means Monday, 2 means Tuesday..., 7 means Sunday and so on. |
| The last five | 00001-99999 | Denotes serial No. |
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website:
https://uk.soundcore.com/pages/psti-related.
1. Power consumption in standby mode: { \le } 0 . 5 W 2. Power management: ≤ 20min 3. Information of applicable adapter:
Brand: ANKER
Manufacturer: Anker Innovations Limited
Model: A2337
Input: 100-240V~ 1.0A, 50-60Hz
Output: 5.0V ⎓ 3.0A 15.0W / 9.0V ⎓ 3.0A 27.0W / 12.0V ⎓ 2.5A 30.0W / 15.0V ⎓
2.0A 30.0W / 20.0V ⎓ 1.5A 30.0W (30.0W Max)
Default Open Port: Classic Bluetooth
Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.