SHOKZ OpenRun

Press and hold the Power/Volume ^ + Button until the LED Indicator flashes blue.

*Audrey will say : “Welcome to Shokz”.

Press and hold the Power/Volume ^ + Button until the LED Indicator flashes red.

*Audrey will say : “Power off”.

1. Start with OpenRun turned off. 2. Press and hold the Volume ^ + Button until the LED Indicator flashes red and blue alternately.

3.Open your device's Bluetooth settings and select " OpenRun by Shokz." Audrey will say "connected."

Pick up the headphones, bring them behind the back of the base of your neck, position the earhooks on your ears, then enjoy your music!

*Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.

Operate volume controls while audio is playing.

While your audio is playing, adjust headphone volume by pushing either the Volume ^ + or Volume - buttons.

*A “beep” will sound when the volume is at its max.

*Listening with headphones at high volume may affect your hearing and the audio will be distorted.

Play/pause music

Click once

Answer call \bigcirc

Click once

Next song

Double-click while music is playing

End call

Click once

Previous song

Triple-click while music is playing

*Only applicable for phone calls, not online calls

Operate controls while audio is not playing

Click the Volume ^ + or Volume - button while music is paused, Audrey will tell you the battery status:

* "Battery high/Battery medium/Battery low/Charge me"

Balanced frequency for listening to music

Enhanced intermediate frequencies for audiobooks, podcasts, etc.

Operate controls while music is playing

Power/Volume ^ + Button

Volume - Button

Press and hold both buttons (Power/Volume ^ + Button and Volume - Button) while music is playing until you hear a beep.

*Audrey will say : “EQ changed”.

Switch between two devices seamlessly with multipoint pairing

Operate controls with headphones powered off

1. Start with your headphones powered off. 2. Press and hold Volume ^ + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.

Audrey will say, "multipoint enabled."

3.Press and hold the multifunction button and Volume ^ + button until Audrey says, "multipoint enabled."

Audrey will say "connected".

4.Open first device's Bluetooth® menu and select "OpenRun by Shokz."Audrey will say, "connected". 5.Turn your headphones off.

Audrey will say, "connected".

6.Re-enter pairing mode by pressing and holding Volume + untilAudrey says “pairing”and the LED indicator flashes red and blue alternately. 7.Open second device's Bluetooth® menu and select "OpenRun by Shokz."Audrey will say, "connected." 8.Turn your headphones off.

You will hear a beep, then Audrey will say “Welcome to Shokz, connected. Second device connected.”

9.Turn your headphones on. Your headphones are now connected to both devices.

Operate controls with headphones powered off.

1. Start with your headphones powered off. 2. Press and hold Volume ^ + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.

Audrey will say, "Multipoint disabled."

3. Press and hold the multifunction button and Volume - button until Audrey will say, "Multipoint disabled."

Operate controls with headphones powered off.

1. Start with your headphones powered off. 2. Press and hold Volume ^ + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.

3.Press and hold the multifunction button, Volume – button and Volume ^ + button until hear two beeps and feel the vibration. 4.Turn your headphones off. OpenRun is now reset and can be re-paired to your device.

Your headphones have four built-in languages: Chinese, English, Japanese and Korean.

1. Start with your headphones powered off. 2. Press and hold Volume ^ + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.

3. Double-press the multifunction button. Languages have been switched when you hear the corresponding language.

The headset will automatically shut dov en charging

Magnetic Charging Cable

When the headphones are at low battery, there will be a “charge me” prompt and the red light will flash intermittently. Use the corresponding magnetic charging cable for charging. The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.

These headphones can detect liquid such as water, sweat, or rain.If the headphones are plugged into the charger while wet, the LED indicator will flash red and blue. The headphones will then beep. If this happens, remove the charging cable, dry them completely, then proceed with charging.

Your headphones are covered by a warranty.

Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty.

*Failure to register will not affect your limited warranty rights.

If you have any trouble or problems,please visit https://shokz.com/pages/faq for more support!

OpenRun Box*1 OpenRun headphone*1 OpenRun Package*1 Magnetic Charging Cable*1 OpenRun User Guide*1 OpenRun Legal Statement*1

If any part of your product is damaged or missing, do not use it.Contact authorized Shokz dealer or Shokz customer service.

*Please note that the packaging envelope may vary depending on the sales region.