roborock F25 Ultra Steam Wet Dry Vacuum Cleaner

• Press: Switch to AUTO/Steam/Hotwater/Sponge mode
• Press and hold for 2 seconds while charging: Switch to Quiet Drying / Fast Drying mode

• Press: Start operating / Enter waitfor-orders mode
• Press and hold for 2 seconds when the vacuum cleaner is waiting for orders: Power off

• Press while charging: Start/Pause self-cleaning
• Press and hold for 2 seconds while charging: Start/Stop drying

To stop self-cleaning or drying, press the buttonNote: while charging.

A1-1—Speaker A1-2—Handle A1-3—Handle Release Hole A1-4—Roller Release Tab A1-5—Adaptive Drive Wheels A1-6—LED Screen A1-7—Dirty Tank Release Button A1-8—Dirty Tank Handle A1-9—Dirty Tank A1-10—Clean Tank Refill Port A1-11—Clean Tank

A1-12—Steam Outlets

A1-13—Clean Tank Release Button

A1-14—Cleaning Solution Refill Port

A1-15—Headlight

A1-16—Roller

A2-1—Drying Tray

A2-2—Drying Air Outlets

A2-3—Charging Contacts

The maintenance brush can be placed in theNote: groove at the back of the charging dock.

A6-1—Light Stripe

A6-2—WiFi Indicator

• Off: WiFi disabled
• Flashing slowly: Waiting for connection
• Flashing quickly: Connecting
• Steady on: WiFi connected

A6-3—Battery Level

A6-4—Sponge Mode

A6-5—AUTO Mode

A6-6—Charging Indicator

A6-7—Error Indicator

A6-8—Hot-water Mode

A6-9—Steam Mode

B1-1—Connect the handle to the main body until it clicks into place. The buttons on the handle should face forward.

B1-2—To detach the handle, insert a penshaped object into the handle release hole on the back of the main body and press. Hold the handle and pull it out.

B2-1—Place the charging dock upside down and plug the power cord into the dock.

The power cord can exit from either the right orNote: left cord storage slot opening.

• Do not place the charging dock in humid locations or near heat sources, such as bathrooms, kitchens, and
• The maintenance brush can be placed in the groove at the back of the charging dock.

Search for "Roborock" in the App Store or Google Play or scan the QR code to download and install the app.

Keep the machine charging or in wait-for-orders mode with the screen on. Press and hold the ⊛ and ⊚ buttons simultaneously until you hear the "Resetting WiFi" voice message. The reset is completed when the WiFi indicator flashes slowly. The vacuum cleaner will then wait for a connection.

If you cannot connect to the vacuum cleaner dueNote: to your router configuration, a forgotten password, or any other reason, reset the WiFi and add your vacuum cleaner as a new device.

Open the Roborock app, tap "Add Device" or the " + " button on the homepage, and add your device following the in-app guide.

• The actual process may vary due to ongoing app updates. Follow the instructions provided in the app.
• Only 2.4 GHz WiFi is supported.

C1-1—Grip the clean tank handle, press the release button, and pull the clean tank upwards at a slight angle to remove it. C1-2—Open the cap of the clean tank refill port, add tap water, and then close the cap tightly. C1-3—Open the cap of the cleaning solution refill port, add a moderate amount of cleaning solution, and then close the cap tightly. C1-4—Place the clean tank back to the cleaner head. Push it down gently until it clicks into place.

• To avoid deforming the clean tank, do not use hot water.
• To prevent corrosion or damage, do not use any disinfectant and only use cleaning solutions recommended by Roborock such as Roborock Floor Cleaning Solution.
• To improve cleaning performance, we recommend adding the cleaning solution to the cleaning solution refill port before use. During cleaning, the machine will automatically mix the solution with clean water based on the preset ratio. Skip this step if floor cleaning solutions are not needed during daily cleaning.

Gently step on the cleaner head and hold the handle. Push it to lock the vacuum cleaner, and pull it to unlock.

C2-1—Locked C2-2—Unlocked

Press the \circledcirc button, and the machine will enter wait-for-orders mode. Gently step on the cleaner head and hold the handle. Then, tilt the handle backwards to unlock the machine. It will begin operating automatically.

The vacuum cleaner can be laid flat to clean under furniture and appliances. To do this, lower the handle while using the machine. The available capacity of the dirty tank decreases during low-profile cleaning. Therefore, we recommend you empty the dirty tank before cleaning under furniture and appliances.

Always keep the vacuum cleaner flat with theNote: buttons on the handle facing up.

Press the \circledast button to switch between AUTO, Steam, Hot-water, and Sponge modes. The screen will display the icon of the current mode.

It is normal if a small amount of steam keepsNote: coming out after using Steam mode.

1. When you stand the machine upright during cleaning, it will stop operating and enter wait-for-orders mode.

2. If the vacuum cleaner remains idle for 5 minutes when it is waiting for orders, it will automatically power off. To manually turn it off, press and hold the \circledcirc button for 2 seconds when it is waiting for orders.

When the dirty tank is full or the clean tank is empty during use, the vacuum cleaner will provide audio and visual alerts. In this case, fill the clean tank or empty the dirty tank before resuming cleaning.

C6-1—Error indicator flashing: Error occurred

C7-1—Hold the dirty tank handle, press the release button, and tilt the tank backwards to remove it. C7-2—Gently pull the handle of the tank lid upwards to remove the lid, and then empty the dirty tank. C7-3—Reinstall the tank lid. Tilt the dirty tank, insert its bottom back into the vacuum cleaner, and then push it gently inwards until it clicks into place.

1. Lock the vacuum cleaner when it is waiting for orders and place it onto the charging dock. Charging starts when

you hear the voice message: "Charging started. Please start self-cleaning."

2. Press the \circledcirc button to start/pause smart self-cleaning. 3. After self-cleaning and drying are completed, follow the voice message and empty the dirty tank promptly to prevent odors.

• Make sure that the clean tank and dirty tank are in place for optimum self-cleaning and drying performance.
• The product is equipped with a built-in highperformance lithium-ion rechargeable battery pack. To maintain battery performance, keep the product charging during normal use.
• Always place the vacuum cleaner back onto the charging dock after use to prevent water stains on the floor.

#

When self-cleaning is completed, drying will start automatically. During charging, press and hold the \circledast button for 2 seconds to switch between drying modes. To start drying directly, press and hold the \circledcirc button for 2 seconds while the machine is charging.

• You can disable automatic drying in the app.
• You can adjust or schedule self-cleaning and drying in the app.
• Self-cleaning and drying are available only when the vacuum cleaner is charging and has a sufficient battery level. The required battery level varies by selfcleaning and drying mode. If the vacuum cleaner is set to steam self-cleaning or fast drying but the battery level is low, it will automatically switch to hot-water self-cleaning or quiet drying, respectively.
• Stay away from the charging dock area during selfcleaning and drying.

After adding your vacuum cleaner in the app, you can adjust the volume and change the language of the voice messages in the app.

When the vacuum cleaner is waiting for orders, press and hold the \circledcirc button and then the \circledcirc button for 5 seconds until you hear the "Restoring factory settings" voice message. The machine will then be restored to factory settings.

To disconnect the vacuum cleaner from WiFi, press the ⊚ and ⊛ buttons until you hear a voice message. Then wait for 5 minutes and the WiFi will be automatically deactivated. If you want to reconnect, please follow the related connecting instructions.

• Before cleaning or maintaining the product, make sure the vacuum cleaner is powered off or stopped and the charging dock is unplugged.
• The frequency of replacement may vary with actual usage. If you notice any abnormal wear, replace the parts immediately.

If the machine is left unused for a prolonged period of time, fully charge it, unplug it, and store it in a cool, dry place. Do not place it in humid locations or direct sunlight. Charge it at least once every 3 months to avoid overdischarge.

Wipe and clean the vacuum cleaner with a soft, dry cloth. Before cleaning, remove the vacuum cleaner from the charging dock and power it off.

Dirty tank: Clean as needed. Filter: Clean or replace as needed.

D1-1—Remove the dirty tank, pull the handle of the tank lid upwards to remove the lid, and remove the filter from the tank lid. Use the provided maintenance brush to clean the debris on the filter. If the filter is dirty, rinse it with cold water and shake off the remaining water.

D1-2—Dry all the parts thoroughly before installing them back in place.

• Leave the filter to dry completely for at least 24 hours before reinstalling it.
• Do not touch the filter surface with hands, brushes, or sharp objects to avoid damaging it.

Clean as needed.

1. To remove the solid-liquid separator, grip the snap-fit fasteners on both sides and detach them. 2. To install the separator, ensure that it faces the dirt inlet, align the snap-fit fasteners properly, and press the fasteners until they snap into place.

* Clean tank: Clean every 2–4 weeks. Roller: Clean as needed and replace every 3 months.

D3-1—Grip the clean tank handle, press the release button, and pull the clean tank upwards at a slight angle to remove it. D3-2—Rinse the tank bottom with clean water.

To prevent blockage, check the steam outlets forNote: dirt and rinse them as needed after extended use.

D3-3—Grab the roller release tab and pull the roller out along the cleaner head. Use the provided maintenance brush to remove dirt from the roller, and then rinse it with clean water.

D3-4—To replace the roller, grab the roller cap and pull it out of the roller. Then, install the roller cap to a new roller.

D3-5—Reinstall the roller and clean tank in sequence.

• D3-6—After using Steam mode, do not touch the positions shown in the diagram.
• D3-7—After using Hot-water mode, do not touch the water outlets shown in the diagram.
• Use the maintenance brush carefully to avoid injury.
• When you detach the roller cap, do not pull it by its handle.
• To prevent potential damage, keep the roller cap attached while cleaning the roller.

Clean the adaptive drive wheels regularly.

Clean as needed.

1. Power off the vacuum cleaner, place it in a stable position, and then remove the dirty tank, clean tank, and roller. 2. Clean the roller slot and dirty water pathway with the provided maintenance brush. 3. Reinstall the roller, clean tank, and dirty tank.

Note: Do not rinse the cleaner head directly with water.

Clean as needed.

Unplug the charging dock and use a soft, dry cloth to clean its surface and charging contacts.

• Do not rinse the charging dock directly with water.
• When there is water on the surface of the charging dock, wipe it with a soft, dry cloth and do not overturn it to prevent damage.

Vacuum Cleaner

Dock Charger

WiFi Specification

* The following information applies only when disposing of the vacuum cleaner and should not be followed for day-to-day operations.

The chemical substances contained in the built-in lithium-ion battery of this product can cause environmental pollution. Remove the battery before disposing of this product and hand it to a professional battery recycling facility for centralized disposal.

1. Power off the machine, and then remove the handle. 2. Remove the dirty tank and the two screws around the fan air inlet. 3. Remove the four soft rubber plugs and the screws at the back casing of the body. 4. Remove the main control cover from the back casing of the body and disconnect the two power supply cables of the battery. 5. Remove the screen cover and disconnect the communication cable from the screen board. 6. Remove the trim from the front casing of the body, and then remove the inner frame of the screen board. 7. Unplug the positive and negative terminals of the fan, and then unplug the fan communication cable. 8. Unplug the battery communication terminals. 9. Remove the screws securing the battery, and then take out the battery.

• Before removing the battery, make sure that it is fully drained. Do not attempt to remove it if the power cord is plugged in.
• When unplugging the connector, make sure that the positive and negative terminals do not come into contact to avoid a short circuit.
• Remove the entire battery pack. Be careful not to damage the battery pack case to avoid a short circuit or leakage of hazardous substances.
• If you come into contact with battery leakage, rinse thoroughly with plenty of water and seek medical attention promptly.

In holiday mode the device will switch to Low Power mode to minimize power consumption. This includes dimming of the LED screen, and the stopping of all non-charging related functions including cleaning, remote control over WiFi, and more.

To activate holiday mode, firstly, remove the wet and dry vacuum cleaner from the charging dock and turn it off. Secondly, press and hold the Switch Mode button, and at the same time, put the vacuum back to the dock and wait 10 seconds until hear "tick-tock" then release the button. The wet and dry vacuum cleaner, main unit and charging dock will enter holiday mode.

To deactivate holiday mode, you need two steps:

1. Remove the wet and dry vacuum cleaner from the charging dock and press and hold the Power button for 10 seconds. 2. Unplug the power cord and reconnect.