Petkit Purobot Ultra

* Before installation and use, please take out the accessory box from the trunk and check if all accessories arecomplete according to the following list:

Main Unit AI Camera Refill Ring P99034 Honeycomb Fine Litter Sier P99032 (Exclusive for mineral cat litter) Pet Odor Eliminator N60 Power Adapter Screw * 4 Hex Key User Manual

Standard Litter Sier P99031(Exclusive for tofu cat litter and mixed cat litter)

High Performance Cat Litter Pad ULTRA P99035

Proximity Sensor

Weight Sensor

(Li the device by holding the handle to move it.)

* Note: The actual product may dier from the image shown due to continuous product improvements; the actual product shall prevail.

Component Description

* High Performance Cat Litter Pad ULTRA P 9 9 0 3 5 ✱ is hereinafter referred to as litter pad. * Pet Odor Eliminator N60 is hereinafter referred to as N60.

❶ Unlock the buckle to remove the cylinder.

❷ Insert the AI camera into the installation port. (as shown in the figure)

Install the "1" and "2" screws first (in a horizontal direction), then install the "3" and "4" screws (in a vertical direction), and tighten them with the hex key.

❹ Place the cylinder on the base and lock the buckle, ensuring it is fastened.

* Handle with care; Do not bump the AI camera.

❶ Remove the refill ring cover, put the refill ring in, and put the cover back.

❷ Install the trunk, ensuring that it attaches to the magnets on both sides.

❸ Open the lid, install the N60, and close the lid.

* Do not place anything on the lid to avoid risks ofdamaging the device.

❶ Connect to the power supply, and the cylinder will reset automatically.

❷ The camera will rotate.

❸ Select the litter sifter according to the cat litter. If it is mineral cat litter, please use the litter sifter P99032. Pour in the cat litter and do not exceed the MAX line. (See 7.1.2 and 7.2.4 for the replacement method of litter sifter)

Litter Sier P99031 (Exclusive for tofu cat litter and mixed cat litter) Litter Sier P99032 (Exclusive for mineral cat litter)

* Please bind the device with the app before using it for the first time. The device can be used only after successful binding.

Available on the App Store

Get it on Google play

Download the PETKIT App from the App Store or Google Play. Or scan the QR code to download and install.

Open the app, click s _ + s and select PETKIT PUROBOT ULTRA WITH CAMERA SELF-CLEANING CAT LITTER BOX.

Press the menu button on the device and switch to “Connect to the network”, then press the OK button, and the screen will display “Connecting”. Please follow the instructions in the App until the binding is successful.

To ensure the safety of pets and the correct use of this product, please read the instructions carefully and use the product properly according to the usage guide after the first successful connection to the device.

❶ Live: View pet’s activities in real time.

When enabled, the camera will default to rotate towards the inside of the cylinder. Additional settings can be configured on the "Privacy Mode" page in the "Settings" menu.

❸ Camera pan: Adjust the camera angle horizontally.

Highlight video collections from the previous are automatically generated daily at 8 am.

Quickly find and replay saved videos by the event category.

* For features such as full video playback, please subscribe to the PETKIT Care+ cloud service. Please refer to PETKIT Care+ Service Agreement for details.

Click “More” to explore more functions.❻ Main functions:

Swipe le on the homepage to view the N60 and Trash Bag usage status.

If the N60 label turns red and shows “N60 has expired”, please replace it promptly. Click “Reset” aer replacing to ensure it shows “Normal”.

If the trash bag label indicates “Out of trash bag”, please replace the Refill Ring promptly.

Tip: If there are warning signs on the packed trash bag, it indicates that the trash bag has run out. Please replace the Refill Ring with a new one.

Click to clean out the clumps from the cylinder.

Press and hold to talk to your pet.

CAUTION: This function needs to be operated on the device control panel. Please stay near the device during packing.

Click to go to the Packing Guide page, then follow the prompts and double press the OK button on the device to start packing.

CAUTION: This function needs to be operated on the device control panel. Please stay near the device during emptying.

Click to go to the Emptying Guide page, then follow the prompts and double press the OK button on the device to start emptying.

Turn on the fill light in the camera.

Open or close the sealed door of the auto-packing module.

Make cat litter evenly distributed in the cylinder; Use it after refilling cat litter.

Adjust the cylinder to the correct position.

Aer subscribing to PETKIT Care+ service plans, footage playback is accessible.

Click the video in the timeline to see the accelerated preview version.

Click Playback to view the complete video footage.

On the Playback page, click “ · · · ” n top right to choose the speed, or hold the center of the screen to play in 2x speed.

Delete the recorded footage as needed.

Swipe le in the timeline and delete the footage.

Click the video in the timeline, then click Playback, click “ · · · ” on the top right and delete the footage.

You can turn on or turn off the camera as you need.

Note: When the camera is turned o, it will automatically turn inside the litter box and stop video recording.

You can customize time slots to turn on the camera. Outside those time slots, the camera will be automatically turned o. Note: Out of the customized periods, the camera will not record videos, but a 5-minute live view is available.

When Pet Visit Detection is turned o, the camera won’t record videos of the pet outside the litter box, and events of the pet appearing outside the litter box won't be logged in the timeline.

When Toilet Video Recording is turned o, the camera won’t record toileting videos, but toileting logs will still be displayed in the timeline.

With this feature on, the live view will be blurred when you enter the device homepage to protect your privacy.

You can turn on the Light Assist for Toileting and Light Assist for Cleaning in [Settings > Cleaning Settings]. Once turned on, the light will automatically turn on every time your pet uses the litter box or cleaning cycle starts, and the light will turn off after your pet leaves or cleaning cycle ends.

Method 1: Go to Settings > Voice Settings and turn off Voice Prompt.

Method 2: Go to Settings > Voice Settings and turn on Do Not Disturb and set the undisturbed period.

Videos are stored for a limited time, and stored videos exceeding the time will be periodically cleared. (e.g., 7-day loop means that videos or pictures from the last 7 days are retained, and content from the eighth day forward is automatically cleared.) All videos can be downloaded, and the downloaded videos can be viewed in the local album of your phone and in the App album.

After subscribing to the PETKIT Care+ service, HD video complete playback and other privileges are available. The details are subject to the page description. PETKIT Care+ service can be transferred to another PETKIT PUROBOT ULTRA, which is only once a year. PETKIT Care+ service is a virtual commodity and is non-refundable once purchased.

Click here to view the PETKIT Care+ Service Agreement.

❶ Press \boxed { \tilde { } } to switch functions and press to execute the function.

Automatically si out clumps from cat litter.

Make cat litter evenly distributed in the cylinder; Use it after refilling cat litter.

Automatically seal the trash bag.

Empty all cat litter from the cylinder.

#

Turn on the fill light in the camera.

Use it when binding the App.

Open or close the sealed door of the auto-packing module.

Adjust the cylinder to the correct position.

The auto-packing function needs to be operated on the control panel. Do not leave the device during the packing process.

* When packing and refilling, the device will make a sound, which is normal and does not indicate any issues with the product's quality.

❶ Press \circledast to select “Pack” and press \boxed { o \kappa } , then double press ° κ as prompted on the screen, and the device will start packing.

❷ After the screen shows the following icon and the device plays the prompt voice, open the lid, take out the packed trash bag, and close the lid.

❸ After removing the packed trash bag, please double press ° κ according to the screen and voice prompts to start auto-refilling.

* Do not leave the device during the emptying process. * Aer emptying all cat litter in the cylinder, you can replace the new cat litter or clean the device.

❶ Press \circledast to select “Empty cat litter”, then press ° κ , and the device will automatically empty all cat litter in the cylinder.

❷ If the waste bin is full during the emptying process, the device will stop emptying and start auto-packing. Aer packing, please take out the packed trash bag, and then double press ° κ to start auto-refilling.

There will be scrolling text at the bottom of the screen.

For the cat’s health, it is suggested to regularly clean or replace these parts.

Do not rinse or soak these parts: base, AI camera, and auto-packing module; otherwise, it may lead to device damage. Only wipe them.

* Before removing the cylinder, please empty all cat litter in it. * Before disassembly, please turn off the device or unplug it.

❶ Remove the trunk, unlock the buckle, and remove the cylinder.

❷ Pinch the handle of the litter sifter to pull it out.

❸ Pinch the handle of the litter pad to pull it out.

❹ Clean the cylinder and the litter sifter with a brush, and rinse them. Wipe the litter pad with a soft cloth.

* Do not brush the litter pad violently to avoid damaging the coating. Do not clean with alcohol, disinfectant, bleach, non-neutral detergent, etc.

Install components only when they are completely dry. ❶ Place the cylinder against the wall.

❷ Hold the litter pad, insert the top of it into the groove ( \bigtriangledown arrows need to be aligned), and then insert the bottom of it into the groove ( arrows need to be aligned).

❸ Gently press and release the pad, and the two sides of it will be naturally stuck into the groove. * Before use, ensure that the blue edge is fully stuck into the groove and that the arrows on both ends are aligned with the indicated direction.

If the blue edge is not visible, the installation is successful.

❹ Pinch the handle of the litter sier, first insert one buckle into point A, then insert the other buckle into point B.

* Please check: If the little sier can swing back and forth, the installation is successful .

❺ Put the cylinder on the base, lock the buckle, and make sure the buckle is fastened.

❻ Install the trunk. The installation is complete.

❶ Wipe these components with a soft cloth: AI camera, base, and proximity sensor.

❷ If there is some litter in the #1 and #2 litter collection trays, take them out, dump the litter, and put them back.

Please copy the video URL and open it in your browser to view the video.

https://usage.petkt.com/web-app/video-manual/product/video/list?deviceType=t6& language=en-US

Please copy the video URL and open it in your browser to view the video.

https://usage.petkt.com/web-app/video-manual/product/video/list?deviceType=t6& language=en-US&selectedIndex=1

• Thank you for choosing the PETKIT PUROBOT ULTRA WITH CAMERA SELF-CLEANING CAT LITTER BOX.
• Please read the user manual carefully before installing and using the product. Any installation or usage qindicates that you have read and accepted the safety guide below.
• PETKIT is not responsible for or legally liable for any accidents or injuries resulting from the improper use of the product.
• PETKIT reserves the right to interpretation and revision.

* Failure to follow the safety guides below may result in product malfunction or other unforeseen losses.

• Please install and use the device according to the user manual.
• Kittens younger than 6 months old are prohibited from using this device. Cats weighing less than 1.5 kg are prohibited from using this device.
• Do not drag the AI camera.
• Do not scratch the lens with sharp objects.
• Do not place the device in a high-temperature or high-humidity environment.
• The device is for indoor use only. Avoid direct sunlight exposure and keep it away from open flames.
• Although the device is powered by a low voltage, electric leakage may occur if the pet bites the power cord. Please keep your pets from biting the power cord.
• Please use only the original adapter to avoid device damage or safety hazards.
• Place the device on a firm, level surface, and avoid touching the wall.
• Do not tilt the device to avoid safety hazards.
• Do not rinse or soak the bottom of the device.
• There are weight sensors at the bottom of the device. Please handle it gently.
• Unplug it if the device is not used for an extended period.
• Children should use this device under the supervision and guidance of adults.
• Repairs should only be performed with professionals’ guidance to avoid accidental damage.
• Do not place anything on top of the device or press the top of it.
• Before leaving for an extended period, please ensure that there is suicient cat litter in the litter box and enough space in the waste bin.
• If you have any problems with the product, please contact our customer service for assistance.

The European directive 2012 / 19 / CE on Waste Electrical and Electronic Equipment(WEEE), requires that old household electrical appliances must not be disposed in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials theycontain and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation,that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and ； (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

#

Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitationestautorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.