PACKAGE CONTENTS
Robot
Auto-Empty Station
Side Brush
Instruction Manual
BaseOZMO Pro 2.0 Vibrating Mopping System and Vacuum Module (DKX55)
OZMO Pro 2.0 Vibrating Mopping System
Washable Mopping Pad
Vacuum Module (pre-installed)Reservoir and Mopping Pad Module (DKX56)
Reservoir (pre-installed)
Mopping Pad PlateWashable Mopping Pad
Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.
PRODUCT DIAGRAM
Robot
Buttons
Short Press: Return to charge
Short Press: Start/Pause/Continue
Long Press: Power on/off
Short Press: Start/End Spot Clean
Long Press: Child Lock
Connect to App: Short-press RESET Button and follow voice prompts to connect to the App. Restore to default settings: Press and hold RESET Button for 5 s. After you hear the voice prompt, the startup music will be played and the robot will be restored to default settings.
RESET Button
Bottom View (DKX55)
OZMO Pro 2.0 Vibrating Mopping System
ust Bin
Bottom View (DKX56)Mopping Pad Module
Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.
Auto-Empty Station
SENSORS
| Name | Functional Description |
| Navigation Module | By utilizing the principle of triangulation, which involves emitting and receiving laser beams reflected by surrounding objects, precise distance measurement information between the DEEBOT and nearby objects can be calculated through algorithms. When the DEEBOT moves within a certain environment, the positions of surrounding objects are determined to create a spatial map of the DEEBOT's surroundings. The measurement range is 8 m. |
| Obstacle Avoidance Module | With three sets of infrared transmitter and receiver pairs, it operates on the principle of infrared reflection to gauge obstacle distances by signal strength. The maximum detection range is approx. 10 cm. |
| Anti-drop Sensor | With infrared distance measurement, the infrared sensor can detect the distance between the bottom of DEEBOT and ground. DEEBOT will not move forward when there are stairs in front or the identified distance exceeds the preset threshold, realizing the Anti-drop. The trigger distance is approx. 60 mm. |
| Carpet Detection Sensor | The ultrasound probe can emit ultrasonic waves with a frequency of 300 KHZ. The energy of the ultrasonic waves is absorbed by the carpet. If the reflected energy is below the threshold, the DEEBOT recognizes the presence of the carpet. According to ECOVACS lab tests, currently, over 50 types of carpets available on the market can be identified. |
| Edge Sensor | With infrared distance measurement, DEEBOT can detect the distance between itself and objects on its right side. When there is a wall or obstacle on the right side, DEEBOT will perform edge cleaning to avoid missing spots or collisions. |
| Anti-collision Sensor | When the transmitted signal is blocked by an obstacle, the signal receiver will not be able to receive the signal. With this principle, the robot will avoid obstacles when colliding with them. |
NOTES BEFORE CLEANING
Tidy up the area to be cleaned by putting furniture, such as chairs, in their proper place.
During the first use, make sure each room door is open to help DEEBOT fully explore your house.
It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.
Put away objects including cables, cloths and slippers, etc. on the floor to improve the cleaning efficiency.
Before using the product on a rug with tasseled edges, please fold the rug edges under.
Please do not stand in narrow spaces, such as hallways, and make sure not to block sensors.
QUICK START
Please remove all protective materials before use.
1 Installation
The sound of Click indicates proper installation.
2 Place the Auto-Empty Station
Keep the area around the Auto-Empty Station clear of objects, especially objects with reflective surfaces.
DOWNLOAD THE ECOVACS HOME APP
To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME App.
1. Scan the QR Code under the Top Cover to download the App.
Under the Top Cover
2. Search ECOVACS HOME to download the App.
Download on the
Ap Store
Get it on
GGole Play
ECOVACS HOME
POWER ON DEEBOT
Press and hold \Lsh for 3 seconds to power on DEEBOT.
Wi-Fi Network Requirements:
- You are using a 2.4 GHz or 2.4/5 GHz mixed network.
- Your router supports 802.11b/g/n and IPv4 protocol.
- Do not use a VPN (Virtual Private Network) or Proxy Server.
- Do not use a hidden network.
- WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
- WEP EAP (Enterprise Authentication Protocol) is not supported.
- Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).
- If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.
- Please enable the WPA2 on your router.
Wi-Fi Indicator
| flashing slowly | Disconnected to Wi-Fi |
| Flashing quickly | Connecting to the App |
| On | Connected to Wi-Fi |
Please be aware that the realization of intelligent functions such as remote startup, voice interaction, 2D map display and control settings, and personalized cleaning (depending on different products) requires users to download and use the ECOVACS HOME App, which is constantly updated. You need to agree to our Privacy Policy and User Agreement before we can process some of your basic and necessary information and enable you to operate the product. If you do not agree with our Privacy Policy and User Agreement, some of the aforementioned intelligent functions cannot be realized through the ECOVACS HOME App, but you can still use the basic functions of this product for manual operation.
CHARGE DEEBOT
Short-press to recall DEEBOT back to the Auto-Empty Station to charge.
OPERATE DEEBOT
Remove the Mopping Pad Plate/Module before mapping. When creating a map for the first time, please follow DEEBOT to help eliminate some minor issues.
For example, DEEBOT may get stuck under the furniture. Please refer to the following solutions:
\textcircled{1} Raise your low sitting furniture if possible; \textcircled{2} Cover the bottom of the furniture; \textcircled{3} Set up Virtual Boundary via the App.
Before first vacuuming, please make sure DEEBOT is in the Auto-Empty Station and fully charged. Short press \textcircled { 1 } to start cleaning and mapping.
Note:
- Do not frequently remove washable mopping pads.
- Do not use a rag or any other object to scratch the Moping Pad Plate.
- When the ECOVACS HOME App prompts that the mopping pad needs to be replaced, please replace it in time. Explore more accessories at ECOVACS HOME App or at https://www.ecovacs.com.
TECHNICAL SPECIFICATIONS
| Model | DKX55/DKX56 | ||
| Rated Input | 20 V === 1 A | Charging Time | 6.5 h |
| Auto-Empty Station | CH2403 | ||
| Rated Input | 220-240 V ~ 50-60 Hz | ||
| Rated Input Current (Charging) | 0.3 A | Rated Output | 20 V === 1 A |
| Power (Emptying) | 1000 W | ||
| DEEBOT Dimensions (L*W*H mm) | 353*351*96 | ||
| Auto-Empty Station Dimensions (L*W*H mm) | 356*451*380 | ||
Output power of the Wi-Fi module is less than 100 mW.
Note: Technical and design specifications may be changed for continuous product improvement. Explore more accessories at https://www.ecovacs.com.
Please use the mobile camera to scan the QR code and obtain the user guide.