Question 1

What is the battery life of the DJI Ronin 4D?

Accepted Answer

The DJI Ronin 4D provides an operating time of up to 150 minutes using the TB50 Intelligent Battery. This is measured in a 26°C (77°F) environment with the gimbal balanced, equipment stationary, Z-axis disabled, and while continuously recording in ProRes RAW. Operating time is reduced when the Ronin 4D is in motion or the Z-axis is enabled.

Question 2

How do I mount a lens on the DJI Ronin 4D?

Accepted Answer

To mount a DL lens, first unfold and lock the roll and tilt axes. Remove the DL mount body cap by pressing the release button and rotating counter-clockwise. Align the red marks on the lens and DL mount, insert the lens, and rotate clockwise until it clicks. For M mount lenses, you need to remove the DL mount and attach the M mount adapter first. Always check compatible lenses on the official DJI website.

Question 3

What storage media does the DJI Ronin 4D support?

Accepted Answer

The DJI Ronin 4D supports DJI PROSSD 1TB (with DJI PROSSD Mount), CFexpress 2.0 Type-B cards, and USB 3.1 Type-C SSDs. The DJI PROSSD 1TB supports internal recording of the highest format and allows direct computer connection via USB-C. For the Ronin 4D-6K, the PROSSD Mount and PROSSD 1TB are not included but are supported. Check the DJI website for specific compatible card and SSD models.

Question 4

How do I attach the hand grips to the DJI Ronin 4D?

Accepted Answer

To attach the hand grips, ensure the lever is unlocked. Insert the left hand grip into the mounting port on the main body until it clicks, then push the lever all the way down to lock it. Repeat the same steps for the right hand grip. Note that the left and right hand grips are not interchangeable.

Question 5

Does the DJI Ronin 4D have built-in microphones?

Accepted Answer

Yes, the DJI Ronin 4D has built-in microphones. The main body features a left built-in microphone and a right built-in microphone for recording audio. Additionally, there is a 3.5mm stereo audio input port that supports microphone and line level input with a 3V voltage bias for microphones.

Question 6

How do I enable the Z-axis on the DJI Ronin 4D?

Accepted Answer

To enable the Z-axis on the DJI Ronin 4D, first power on the system. Loosen the Z-axis lock knob on the main body, then press the Z-axis switch on the main body or press the right hand grip trigger twice. Ensure the total Z-axis payload, including the gimbal, camera, lens, LiDAR, and accessories, is less than 2 kg before enabling.

Question 7

What video codecs does the DJI Ronin 4D support?

Accepted Answer

The DJI Ronin 4D supports internal recording of Apple ProRes RAW, Apple ProRes 422 HQ, and H.264 video. The specific resolutions and frame rates depend on whether you have the X9-6K or X9-8K camera model. Recording in Apple ProRes RAW requires purchasing the DJI Ronin 4D RAW License and using a DJI PROSSD with the PROSSD Mount.

Question 8

How do I activate my DJI Ronin 4D?

Accepted Answer

Activate your DJI Ronin 4D by first ensuring the LOCK switch is unlocked and the three gimbal axes are unlocked. Power on the Ronin 4D by holding the power button for 1 second. Connect it to a computer using the provided USB-A to USB-C cable, launch DJI Assistant 2 (Ronin Series), select Ronin 4D, and follow the on-screen steps. Do not power off or disconnect during activation.

Question 9

What is the maximum payload for the DJI Ronin 4D Z-axis?

Accepted Answer

The maximum payload for the DJI Ronin 4D Z-axis is less than 2 kg. This total includes the X9 Gimbal and Camera, X9 Focus Motor, counter weight, LiDAR range finder, and lens. Exceeding this limit may affect performance and stabilization.

Question 10

How do I balance the Z-axis on the DJI Ronin 4D?

Accepted Answer

To balance the Z-axis, first power on the Ronin 4D and enable the Z-axis. Loosen the Z-axis lock and press the Z-axis switch. Switch the Z-axis mode to Follow via the monitor menu. If a red or orange imbalance icon appears, tap it for the on-screen guide and turn the adjustment knob accordingly. The Z-axis is balanced when no red bars or arrows are displayed. Keep the system horizontal and steady during balancing.

Question 11

What are the gimbal modes on the DJI Ronin 4D?

Accepted Answer

The DJI Ronin 4D gimbal modes include Lock, Pan Follow, Pan and Tilt Follow, FPV, and Custom modes. Lock Mode prevents the gimbal from following body movement. Pan Follow only the pan axis follows. Pan and Tilt Follow both pan and tilt axes follow. FPV all three axes follow. Custom Mode allows you to enable or disable any axis follow. Select the mode via the GIMBAL MODE toggle or the monitor menu.

Question 12

How do I record audio with an external microphone on the DJI Ronin 4D?

Accepted Answer

To record audio with an external microphone on the DJI Ronin 4D, use the 3.5mm microphone port on the main body. This port supports microphone and line level input, has a 3V voltage bias for microphones, and features an M6×P0.5 screw thread for connectors with a screw lock. In the Audio menu, you can set the source to '3.5 Mic L/R' and adjust the gain.

Question 13

What is the HDMI output specification of the DJI Ronin 4D?

Accepted Answer

The DJI Ronin 4D supports an HDMI Type-A port that can output 4K video at 60 frames per second. This allows for external monitoring or recording. The HDMI settings in the menu also support LUT function and allow you to enable or disable on-screen display when outputting clean footage.

Question 14

What is Sport Mode on the DJI Ronin 4D and how do I use it?

Accepted Answer

Sport Mode on the DJI Ronin 4D greatly increases the gimbal's follow speed, making it suitable for shooting fast-moving subjects. To enter Sport Mode, press and hold the M button on the left hand grip or top handle while in Follow mode, then release to exit. Alternatively, press the M button twice to toggle Sport Mode on or off. This mode also affects the Z-axis when enabled.

Question 15

How do I format the storage media on the DJI Ronin 4D?

Accepted Answer

Format storage media on the DJI Ronin 4D by going to the Storage menu on the high-bright main monitor. Tap 'Format' and confirm the prompt. Ensure all footage is backed up first. For the DJI PROSSD 1TB, only format when connected to Ronin 4D and do not disconnect or power off during the process. The system supports formatting for PROSSD, CFexpress cards, and USB-C SSDs.

Question 16

What is the minimum focus distance of the DJI Ronin 4D?

Accepted Answer

The minimum focus distance of the DJI Ronin 4D is 1 foot, which is approximately 0.3 meters. This information is displayed in the MF (Manual Focus) readings on the monitor. You can set the focus unit to imperial or metric in the Lens settings menu under Focus and Unit.